- 215341 - WELDER 3
- Industry
- GEN
- Region
- SC-South Carolina
- City
- Charleston
- State
- SC
- Rate
- Up to $38.90 DOE
- Duration
- 12 months
- Description
Chipton-Ross is seeking a Welder 3 for a contract opportunity in Charleston, SC.
BASIC QUALIFICATIONS (REQUIRED SKILLS/EXPERIENCE):
High School diploma or equivalent and 5 years additional education and/or related experience; Apprentice graduate/ Associate's Degree in relevant discipline and 3 years of related experience. May require certification.
1.Confined space trained in accordance with OSHA Standards 29 CFR 1915 Subpart B. 2.Hazard communication trained in accordance with OSHA Standard 29CFR 1915.1200 (1910.1200) (h) – (1) through (3) (iv). 3. Respirator trained and qualified. A Respirator Medical Clearance Examination as required by a Physician. The Respirator Training and Fit Testing will meet the requirements of Standard 29CFR1910.134 and each individual shall be trained in a negative-pressure type respirator, MSA COMFO CLASSIC. Newport News requires the use of a MSA COMFO CLASSIC Respirator only (approximate weight 12 oz.). Daily use of respirator may occur. 4.Fall Protection/4-D Body Harness-Vertical & Horizontal Lifelines-Beam Clamp trained and qualified in accordance with the following OSHA Regulations; 29CFR1915.159,29CFR1915.71(j)(3), 29CFR1915.73(d), and 29CFR1915.77(c). Newport News highly recommends the vest-donning type of body harness instead of the step-into-type body harness, with D-Ring in the back. Individuals must be trained (which includes having donned the body harness and demonstrated practical use of the vertical & horizontal lifelines and beam clamp) with the same type fall protection equipment that they are expected to wear on Newport News premises or on off-site Newport News work locations. Body Harness and Vertical & Horizontal Lifelines and Beam Clamp Systems shall comply with the requirements of ANSI Z359.1. NNS may require 60’ Self Retracting Lifelines that are Leading Edge compliant and a Quick Grab. NNS uses the FallTech DuraTech Edge SRL-LE. NNS uses the Miller Rope Grab. This rope grab must fit 5/16” carbon steel wire rope. 5. Personal Protective Equipment (PPE*) training in accordance with OSHA Standards 29CFR 1915 Subpart I and Hearing Conversation 29CFT 1910.95 (i) (j) (k) (l). 6. Non-prescription and prescription safety glasses must meet the requirements of ANSI Z87, with permanently attached side shields. 7. Hard Hats must be WHITE in color with the Leased Labor Provider Company’s name and the individual's last name on the front of the hard hat. All Leased Labor personnel engaged in Welding must wear either the Fiber Metal Type 1 Class C or the MSA Skullgard Class A Hard Hat only. 8. Hearing protection must be of the muff type (banded or mounted) and must have been trained on their use. Newport News uses the Bilsom Leightning (model L1N). 9. Foot protection must be 8” safety boots or leather safety shoes w/spats. 10. Coveralls must be flame resistant with long sleeves. 11. Audiometric testing which documents proof of individual worker’s hearing function. The Leased Labor Provider Company shall ensure those individuals performing audiometric testing meet requirements listed in OSHA Regulation 29CFR1910.95 (g) (3) and that the audiometric test results are fully explained to each individual by the testing firm. The individual shall sign the test reports as proof of having received verbal communication of the test results. 12. The physical work effort expected is demanding. The temperature and humidity extremes that may be encountered are the result of ambient temperature and humidity levels in the work area. 13. Hexavalent Chromium medical examinations and clearances. 14. Full welding jacket. 15. Welding shield leather bib. * PPE training means general requirements, eye and face protection, head protection, foot protection, hand and body protection, hearing protection, and body harness-personal fall arrest systems (PFAS) and position device systems.
POSITION RESPONSIBILITIES:
Performs welding processes on aluminum and steel parts and assemblies to required tolerances using welding metals and metal alloys. Determines layouts and welds parts and assemblies according to engineering drawings and specifications. May monitor and verify quality in accordance with statistical process or other control procedures.
REQUIRED EDUCATION:
High school diploma or equivalent.
School must be accredited.
WORK HOURS:
First Shift 7:00AM-3:30 PM
Employment will be contingent on clearing a drug screen and background check. Both must clear prior to start date.
- Contact
-
Andrew Craft
acraft@chiptonross.com
CHIPTON-ROSS, INC.
11832 Fishing Point Drive, Suite 100
Newport News, VA 23606
Phone: (757) 595-0005 x173 or (877) 244-5418 x173
Candidates responding to this posting must currently possess the eligibility to work in the United States. No third parties please.
Employment will be contingent on candidate clearing pre-employment drug screen and background check.
Chipton-Ross provides equal employment opportunities to all employees and applicants for employment without regard to race, color, creed, religion, national origin, sex (including pregnancy), age, disability, sexual orientation, gender identity and/or expression, protected veteran status, genetic information, or any other characteristic protected by Federal, State or local law. This policy governs all areas of employment at Chipton-Ross, including recruiting, hiring, training, assignment, promotions, compensation, benefits, discipline, and terminations.