- 179009 - Inspector Specialist
- CA-S.Cali-Los Angeles/Orange Counties
- Up to $35.00 DOE
- 6+ Months
- First Article Inspection, Airframe, Catia
This occupation requires the inspection of: - Major Airframe Assemblies - In Process Inspections - Final Installation Inspections - First Article Inspections - Automated Machine Parts/Assembly Inspection Determines method of inspection and type of setup required on first run parts which must be checked from surface plate. Setups. Determines allowable deviations in dimensions and finishes when not shown on blueprints or are not a matter of shop practice. Performs progressive layout operations to determine machine-ability and availability of material for subsequent machining operations on parts, castings, and forgings involving compound angles, compound and reverse contours, coordinated dimensions, numerous precision tolerance dimensions and/or irregular machines surfaces requiring three plane coordination. Lays out developmental parts, which require an inspection setup. Sets up part on surface plate using blocks, parallels, clamps, and V blocks to place part in desirable position for taking readings with precision measuring instruments. Checks first run or developmental parts and approves first correct part. Sets up thread comparator machine for production runs incidental to the other work described herein. Inspects parts involving numerous precision tolerance dimensions, coordinated dimensions, irregular surfaces requiring coordination in several planes, compound angles and compounds and reverse contours which must be inspected by precision measuring instruments from surfacer plate setups and where no inspection jigs or fixtures are available. Stamps or otherwise approves acceptable parts and prepares paper work as required. Use complex blueprints to visualize three dimensions from flat views. Use shop mathematics including algebra and fractions.
- Supporting the 747-8 - Adhere to Client procedures that address health, safety, and operational functions. - Perform in-process inspection and functional testing operationsof completed major assemblies, experimental production, prototype, first article, and modifications of airframes. - Perform inspection of parts/assemblies to engineering drawings and engineering sketches, which establish exact locations and dimensions. Inspect installations, pre-installation, precisions, and close tolerance part inspection. - Inspect parts/assemblies installations for workmanship and functionality using engineering drawings, specifications, planning, and other approved information. - Inspect completed major airframe assembly sections. Inspect sub-assemblies common to the major airframe assembly including tubing, wiring electrical components, control brackets, flight accessories, and flight equipment. -Perform functional checks on such systems as hydraulic,plumbing, electrical, fire suppression, and fight controls. -Inspect in-process work for quality, completeness, proper functioning, proper documentation and adherence to engineering requirements. -Approve and buy-off all acceptable work, rework, and repairs as required. -Document all nonconforming products to the applicable procedures. -Ensure (product) that non-conforming product is identified and controlled to prevent its unintended use or delivery. -Perform wet/dry tape test for suspect paint failures inspection. -Perform Operational Assessment audits and document findings per the quality requirements. -Performing skin quality inspections. -Perform first article inspection to ensure part/assembly meets engineering, customer, and quality requirements. -Train other employees within the Inspection department.
Hold a certified FAA Airframe License or equivalent Four years minimum of aircraft related experience. Four years minimum of drawing and/or CATIA experience.
-High School diploma or equivalent -Vocational aircraft training or Certified Airframe school or Military Aircraft training -Shop mathematics -Basic Computer Skills -Proficient in the use of directives, engineering drawings, specifications, and first articles (AS9102 standards) -Understand inspection procedures covering sub-assemblies, major assemblies, automated machine inspection and aircraft structure inspection. -Proficient in the use of micrometers, calipers, go and no-go gauges, dial indicators, height gauge, and thickness measuring equipment.
Accredited High School Diploma/GED
Employment will be contingent on clearing a drug screen and background check. Both must clear prior to start date.
420 Culver Boulevard
Playa Del Rey, CA 90293
Phone: (310) 414-7800 x251 or (800) 927-9318 x251
Candidates responding to this posting must currently possess the eligibility to work in the United States. No third parties please.
Employment will be contingent on candidate clearing pre-employment drug screen and background check.
Chipton-Ross provides equal employment opportunities to all employees and applicants for employment without regard to race, color, creed, religion, national origin, sex (including pregnancy), age, disability, sexual orientation, gender identity and/or expression, protected veteran status, genetic information, or any other characteristic protected by Federal, State or local law. This policy governs all areas of employment at Chipton-Ross, including recruiting, hiring, training, assignment, promotions, compensation, benefits, discipline, and terminations.